Auto-hold conditions

When both the following conditions are satisfied, the instrument freezes the readout.

• The measured value does not fluctuate beyond the variation range for a certain period.

• The measured value exceeds the threshold value.

The instrument continues to freeze the readout until the auto-hold conditions are satisfied again.

 

1. (1)

   The instrument does not freeze the readout automatically. (The measured value does not become less than the threshold value.)

2. (2)

   The instrument does not freeze the readout automatically. (The measured value does not exceed the threshold value.)

 

The variation range and threshold value may vary depending on the range.

Range	Variation width	Threshold value
60.00 mA	400 counts or less	150 counts
600.0 mA
6.000 A
60.00 A	500 counts or less
600.0 A